- Top Pick: Phanteks Digital RGB LED Starter Kit
- Runner-up: Speclux NEON RGB PC LED Strip
- Also consider: Airgoo NEON Addressable RGB PC LED Strip
A good lighting kit does more than make a case glow. It frames the parts you chose, softens harsh shadows inside the case, and turns a plain black box into a build that looks finished. The wrong kit leaves dead corners, clashes with the rest of the system, or simply does not plug into anything you own.
This guide compares five kits that cover the main ways to light a PC: addressable strips for a motherboard header, a remote-controlled starter kit with its own hub, a neon-style strip for older 12-volt headers, and a cable cover kit that lights the power cables.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The Phanteks Digital RGB LED Starter Kit is the most complete pick, with a hub, a remote, and two strips in the box. For a smaller spend, the Speclux NEON strip and the Airgoo NEON strip both add bright diffused light for a single header. The AsiaHorse Aurora Pro cover is the pick for builders who want the cable runs lit instead of the case walls.
Phanteks Digital RGB LED Starter Kit
The Phanteks Digital RGB LED Starter Kit is the most complete lighting package in this guide. The box holds two 400 mm digital RGB strips, a controller hub, and a remote, so it works even on a motherboard with no RGB header at all, a common gap on budget boards.
Each strip carries 30 individually addressable LEDs, so the hub can run chase, wave, and gradient effects instead of one flat color. The strips daisy-chain for later expansion, and a motherboard adapter is included for boards with a 5-volt digital RGB header. Phanteks lists compatibility with the major motherboard lighting programs from ASUS, MSI, ASRock, and Gigabyte, plus Razer Chroma. Rated lifespan is 20,000 hours, with a two-year manufacturer warranty. Measure the edges before ordering: 400 mm suits a mid-tower, but can feel short in a full tower or long in a compact case, and the hub needs a home inside the case plus a spare SATA power lead.
Specs
| Specification | Detail |
|---|---|
| Brand | Phanteks |
| Model | PH-DRGB_SKT |
| Strips included | 2 x 400 mm digital RGB strips |
| LEDs per strip | 30 |
| Control | Controller hub and remote |
| Motherboard sync | 5-volt digital RGB header with included adapter |
| Rated lifespan | 20,000 hours |
| Warranty | 2 years |
Speclux NEON RGB PC LED Strip
The Speclux NEON RGB PC LED Strip is the simplest way to add light to a case that already has a 12-volt four-pin RGB header. Its LEDs sit inside a milky diffuser tube that softens the individual points of light into one smooth line, and the kit mounts with 12 magnetic brackets, so it sticks to steel case panels and can be moved without leaving adhesive behind.
Compatibility is the deciding factor. This strip runs on 12-volt RGB, the older four-pin standard, so it plugs straight into motherboards and controllers that still carry that header. It will not work on a 5-volt three-pin addressable header, and forcing the connection can damage the strip, so check the header before ordering. It syncs with ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, and ASRock RGB LED. The trade-off is control: a 12-volt strip shows one color at a time, so there are no rainbow chases or per-LED gradients. For many builders a steady color that matches the fans is all the case needs.
Specs
| Specification | Detail |
|---|---|
| Brand | Speclux |
| Model | BS-PC031-39L-RGBx2 |
| Light style | NEON diffused strip |
| Voltage | 12 volts |
| Connector | 4-pin RGB header |
| Mounting | 12 magnetic brackets |
| Motherboard sync | ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED |
| LED count | Not stated |
Airgoo NEON Addressable RGB PC LED Strip
The Airgoo NEON Addressable RGB PC LED Strip is a pair of diffused neon-style strips that run on a modern 5-volt three-pin addressable header. Each strip is 15.7 inches long and carries WS2812B addressable LEDs, so the motherboard software can paint gradients and moving effects instead of a single flat color. The silicone diffuser softens each LED into a continuous line.
Two strips come in the box, along with 12 strong magnetic brackets, so they can be test-fitted and moved without peeling adhesive off the case. They sync with ASUS Aura Sync, Gigabyte RGB Fusion, and MSI Mystic Light Sync, draw 10 watts, and carry a one-year warranty. The warning that matters most is the voltage: a 5-volt addressable strip must never go on a 12-volt four-pin header, and the two connectors look similar enough that a hurried build can get it wrong.
Specs
| Specification | Detail |
|---|---|
| Brand | Airgoo |
| Model | AG-NEON-LS1 |
| Strips included | 2 x 15.7-inch strips |
| LED type | WS2812B addressable RGB |
| Voltage | 5 volts |
| Connector | 3-pin ARGB header |
| Power draw | 10 watts |
| Mounting | 12 magnetic brackets |
| Dimensions | 15.75 x 0.55 x 0.28 inches |
| Warranty | 1 year |
EZDIY-FAB Premium Addressable LED Strip Kit
The EZDIY-FAB Premium Addressable LED Strip Kit is a single one-meter strip with 66 addressable LEDs, and it suits builders who want one long run of light rather than two short ones. A single meter covers the full top edge of most mid-tower cases in one sweep, and the high LED density keeps the line smooth with no visible gaps.
Mounting is where this kit stands out: the box includes three kinds of mounting clips, which can hold the strip along a case edge, around a corner, or flat against a panel, and the strip can be moved later without fighting old tape. That helps in cases with unusual layouts, where a straight adhesive run would cross a cable route or a fan mount. One strip is also the limit: a single meter lights one edge well, but a builder who wants the top and bottom edges lit will need a second kit. It has no bundled controller or remote, so a board without an addressable header leaves it with nothing to plug into.
Specs
| Specification | Detail |
|---|---|
| Brand | EZDIY-FAB |
| Model | UK2-rainbow LED strip-1m |
| Length | 1 meter (39.3 inches) |
| LEDs | 66 addressable LEDs |
| Voltage | 5 volts |
| Connector | 3-pin ARGB header |
| Mounting | 3 kinds of mounting clips |
| Compatibility | 5-volt ARGB motherboards only, not 12-volt RGB |
| Date first available | September 29, 2021 |
AsiaHorse Aurora Pro RGB Cable Cover
The AsiaHorse Aurora Pro RGB Cable Cover takes a different approach from every other pick in this guide: instead of lighting the case walls, it lights the power cables. The kit is a set of addressable light covers that clip over the existing 24-pin motherboard cable and the GPU power cables, with 108 addressable LEDs spread across the covers.
The cover fits 24-pin, 2×8-pin, and 12+4-pin cable layouts, so it suits current combinations as well as older ones, and it syncs through a 5-volt three-pin ARGB header. Because this is a cover rather than a cable, it clips over the cables already in the build, so there is no rewiring and no need to match a power supply pinout. The listing ships from Amazon and is sold by Asiahorse. Fit needs care: the cover adds bulk to the cable run, so a tight case may not leave space for it.
Specs
| Specification | Detail |
|---|---|
| Brand | AsiaHorse |
| Model | AURORA-108-24PIN-Black-SA-1 |
| LEDs | 108 addressable LEDs |
| Fits | 24-pin, 2×8-pin, and 12+4-pin cable layouts |
| Connector | 5-volt 3-pin ARGB header |
| Type | Light cover that clips over existing cables |
| Ships from | Amazon |
| Sold by | Asiahorse |
How to choose
Start with the header on the motherboard, because it decides which kits can plug in at all. A 5-volt three-pin addressable header takes the Airgoo, EZDIY-FAB, and AsiaHorse picks, and it also takes the Phanteks kit through its included adapter. A 12-volt four-pin header takes only the Speclux strip in this guide. A board with no RGB header at all can still use the Phanteks starter kit, because its hub and remote work on their own. Mixing the two voltages can damage hardware, so match the connector and the voltage before ordering.
Next, measure the case. Two 400 mm strips suit a mid-tower, a single one-meter strip covers one long edge, and two 15.7-inch strips cover the top and bottom of a standard mid-tower. A strip that is too short leaves a dark corner, and one that is too long has to bend or bunch. Magnetic brackets need steel panels to grip, while clip and adhesive mounting work on more surfaces.
Who should skip
Builders with a board that has no spare RGB header and no interest in a hub should skip the header-only strips in this guide, since the Airgoo, EZDIY-FAB, Speclux, and AsiaHorse picks all need a header to work. The Phanteks starter kit is the only one here that runs on its own. Builders with a very small case should also pause: a 400 mm or one-meter strip has nowhere sensible to go in a compact case, and a cable cover adds bulk that a tight layout cannot spare.
Anyone who wants the case to stay dark should skip lighting kits entirely. Light inside a case shows dust, cable clutter, and fingerprints on the glass, and it adds cables and a hub to manage.
Frequently Asked Questions
Do I need a motherboard RGB header to use a PC lighting kit?
Most kits in this guide do need one: the Airgoo, EZDIY-FAB, Speclux, and AsiaHorse picks all plug into a motherboard RGB or ARGB header. The Phanteks starter kit is the exception, because it includes its own controller hub and remote and works without a header.
What is the difference between 5-volt ARGB and 12-volt RGB strips?
A 5-volt ARGB strip has individually addressable LEDs, so each LED can show a different color and the strip can run gradients and moving effects. A 12-volt RGB strip shows one color across the whole strip at a time. The two use different connectors and voltages.
Can I cut an LED strip to fit my case?
Some bare LED strips can be cut at marked points, but none of the diffused neon-style strips in this guide should be cut. Cutting one breaks the diffuser and the LED chain, and it voids the warranty. Measure the case first and pick a strip length that fits.
Will a lighting kit slow down my PC or use much power?
No. A lighting kit draws only a few watts and runs through the motherboard header or a SATA power lead, so it has no effect on gaming or work performance. The main cost is cable management: the hub, strips, and cables all need a tidy route inside the case.
Final verdict
For most builders, the Phanteks Digital RGB LED Starter Kit is the safest first lighting kit, because it works with or without a motherboard header and the box holds everything needed. Builders with a spare 5-volt addressable header who want the smooth neon look should look at the Airgoo strip, while the EZDIY-FAB one-meter strip suits a single long edge. The Speclux strip is the pick for older 12-volt headers, and the AsiaHorse cable cover is the most distinctive option for a build where the cables deserve the spotlight.



