- Top Pick: Black Shark Magnetic Phone Cooler 5 Pro
- Runner-up: Razer Phone Cooler Chroma (Universal Clamp)
- Also consider: Black Shark FunCooler 5 Magnetic
Many PC gamers also play on a phone, whether for a mobile game between matches or a stream beside the keyboard. A phone that gets hot during a long session can throttle, dim its screen, and drop frames at the worst moment, and a dedicated phone cooler is the fix that takes up no desk space.
A phone cooler is a small fan with a cold plate that clips or snaps onto the back of a phone and pulls heat away while the game runs. The best ones pair a semiconductor plate with a fan, attach securely to magnetic or non-magnetic phones, and run quietly enough to sit next to a microphone.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The Black Shark Magnetic Phone Cooler 5 Pro is the strongest cooler here, with 35 watts of cooling power and detachable grips for non-magnetic phones. The Razer Phone Cooler Chroma suits an RGB desk setup, while the Black Shark FunCooler 5 Magnetic is the balanced mid-range pick. The Flydigi B7 is the strongest clip-on option, and the Lumivista S85-GM is the only cordless pick.
Black Shark Magnetic Phone Cooler 5 Pro
The Black Shark Magnetic Phone Cooler 5 Pro is the most powerful cooler in this roundup, and it is the one to buy when a phone regularly gets too hot to hold during long sessions. It delivers up to 35 watts of cooling power, and the brand lists a temperature drop of up to 113 degrees Fahrenheit, with the plate reaching below zero in 25 seconds and cooling down to as low as minus 4 degrees Fahrenheit.
Attachment is flexible. The cooler snaps magnetically onto MagSafe-compatible iPhones and magnetic Android cases with a 12-newton ring, and the box includes detachable grips that clamp onto phones between 66 and 85 millimeters wide. Two temperature sensors feed the app.
The catch is power. Peak cooling needs a wall charger rated at 40 watts or higher, and that charger is not included. One older Amazon crawl showed no featured offers for this listing, so confirm the listing is live before ordering. The date field reads October 18, 2021, a catalog quirk for a 2025 model.
Specs
| Feature | Detail |
|---|---|
| Model | BR52 |
| Cooling power | Up to 35 watts |
| Fan speed | Up to 7200 RPM |
| RGB lighting | 18 addressable RGB LEDs |
| Attachment | Magnetic, grips 66 to 85 millimeters |
| App control | Yes, with dual temperature sensors |
| Power requirement | 40-watt or higher, not included |
| Temperature drop | Up to 113 degrees Fahrenheit, down to minus 4 |
| Compatibility | iPhone, Android, Switch, iPad, laptops |
Razer Phone Cooler Chroma (Universal Clamp)
The Razer Phone Cooler Chroma is the pick for a PC gamer who already lives in the Razer ecosystem. It pairs a Peltier cooling tile with an aluminum heatsink and a seven-blade fan that spins up to 6400 RPM, while keeping noise to a quiet 30 decibels. Twelve Chroma RGB LEDs wrap the fan and support 16.8 million colors.
This is the universal clamp version, model RC21-01790200-R3M1, which grips phones up to 88 millimeters wide and works with Android phones and iPhones that do not have MagSafe. A Bluetooth connection lets the owner adjust fan speed and lighting from the phone. The 1.5-meter USB-C cable is included, and the cooler carries a one-year warranty.
There is no battery inside, so the cooler must stay plugged in while it runs. That is fine on a desk, but it makes the Razer a poor choice for couch or travel play. Confirm the clamp version before ordering, because the MagSafe version is a different model, RC21-01790100-R3M1.
Specs
| Feature | Detail |
|---|---|
| Model | RC21-01790200-R3M1 |
| Fan | Seven-blade fan, up to 6400 RPM |
| Noise level | 30 decibels |
| RGB lighting | 12 Chroma RGB LEDs, 16.8 million colors |
| Attachment | Clamp, fits phones up to 88 millimeters |
| App control | Yes, over Bluetooth |
| Power | USB-C, 1.5-meter cable, no battery |
| Cooling | Peltier tile with aluminum heatsink |
| Compatibility | Android phones and non-MagSafe iPhones |
Black Shark FunCooler 5 Magnetic
The Black Shark FunCooler 5 Magnetic is the balanced pick in this roundup. It delivers 20 watts of cooling power through a semiconductor plate, which is enough for most mobile games without the heavy power demands of the 35-watt flagship above. The magnetic ring holds with 12 newtons of force, so the cooler stays put on a MagSafe-compatible phone or a magnetic case during a match.
Two cooling modes cover different sessions. Overclocking mode pushes the fan to its 6500 RPM maximum for heavy games, while silent mode holds noise to 30 decibels for late-night play. The cooler is 60 millimeters across and weighs 0.18 pounds. It needs a power supply rated at 20 watts or higher, and the data cable is not included.
One detail to watch is the model code. This cooler is model BR50, and the same BR50 code is also sold as the FunCooler 5 Lite, so buyers should confirm the listing name reads FunCooler 5 Magnetic before ordering. The listing first appeared in April 2025.
Specs
| Feature | Detail |
|---|---|
| Model | BR50 |
| Cooling power | Up to 20 watts |
| Magnetic force | 12 newtons |
| Fan speed | Up to 6500 RPM |
| Noise level | 30 decibels |
| Cooling modes | Overclocking and silent |
| Weight | 0.18 pounds |
| Power requirement | 20-watt or higher, cable not included |
| First available | April 18, 2025 |
Flydigi B7
The Flydigi B7 is the strongest clip-on cooler in this roundup, and it is the right pick for a phone without any magnetic attachment. Its universal back clip grips phones with screen sizes from 4.7 to 6.7 inches, so it works with nearly any current phone.
Cooling is serious for a clip-on. The Flydigi B7 uses FlyOC overclocking cooling at up to 27 watts, with a 36 by 36 millimeter semiconductor plate and three temperature sensors. The brand lists cooling to 32 degrees Fahrenheit in one minute under ideal conditions, and Intelligent Temperature Control 2.0 cuts condensation risk. Noise stays at or below 37 decibels, and the unit weighs only 95 grams.
The cooler connects to the Flydigi app over Bluetooth for manual fan control and mode changes. Peak performance needs a power adapter rated at 33 watts or higher, and that adapter is not included. This listing is confirmed through its published manual page rather than an Amazon product information excerpt, so double-check the listing before ordering.
Specs
| Feature | Detail |
|---|---|
| Model | FLYDIGI B7 |
| Cooling power | Up to 27 watts |
| Cooling plate | 36 by 36 millimeters, semiconductor |
| Noise level | 37 decibels or lower at full power |
| Attachment | Universal back clip, phones 4.7 to 6.7 inches |
| Temperature control | Temperature Control 2.0, three sensors |
| App control | Yes, over Bluetooth |
| Weight | 95 grams |
| Power requirement | 33-watt or higher, not included |
Lumivista S85-GM Phone Cooler
The Lumivista S85-GM is the only cordless cooler in this roundup, and that single feature changes how it fits into a setup. It carries a detachable rechargeable battery, so it can cool a phone with no cable at all, which suits couch play and travel. The brand lists cordless use of up to three hours, and the cooler can also run on USB-C power.
Cooling comes from a semiconductor plate rated at 10 watts, which suits casual and mid-weight games. The brand lists a drop to minus 5 degrees Celsius in three seconds, and an AI smart temperature control system adjusts cooling automatically. It attaches magnetically or with a clip, and works with Android phones, iPhones, and iPad Pro tablets.
The listing is new, first available in September 2025, which is a good sign for stock. The listing battery field reads like a catalog quirk, so treat the cordless runtime as a brand claim. The 10-watt power means this cooler is not the pick for the heaviest games.
Specs
| Feature | Detail |
|---|---|
| Model | S85-GM |
| Cooling power | 10 watts |
| Cooling method | Semiconductor |
| Battery | Detachable rechargeable battery, cordless use |
| RGB lighting | Yes |
| Temperature control | AI smart temperature control |
| Attachment | Magnetic and clip |
| Compatibility | Android, iPhone, iPad Pro |
| UPC | 659381156235 |
How to choose
Start with fit, because a cooler that does not attach securely is useless no matter how strong its fan is. Magnetic coolers need a MagSafe-compatible phone or a magnetic case, and many include a ring plate for phones without magnets. Clip-on coolers fit a wider range of phones and thick cases. Measure the phone width against the listed range before ordering.
Next, check power. Most coolers need a USB-C power source, and the stronger the cooler, the stronger the charger it needs. A strong cooler with a weak charger runs far below its rated cooling, and the charger is often sold separately. Cordless coolers trade cooling power and runtime for freedom.
Then weigh noise, weight, and extras. A cooler rated at 30 decibels or lower will not fight a microphone during a stream, while a louder fan is fine for solo play with headphones. RGB lighting and app control add nothing to cooling, so treat them as a tiebreaker.
Who should skip
A phone cooler is not for every player. Casual players who game in short sessions rarely heat a phone enough to throttle, so the cooler would sit in a drawer. Anyone who charges wirelessly should also be careful, because a strong magnet on the back of a phone can interfere with wireless charging and NFC.
Players who mostly game on a PC or a handheld console will get little value from a phone cooler. The accessory only helps when the phone itself is doing the heavy work, so if the phone is mainly a second screen for chat or a stream, the money is better spent elsewhere.
Frequently Asked Questions
Do phone coolers actually help gaming performance?
A phone cooler helps when heat is the reason a phone slows down. A cooler pulls heat off the back of the phone and helps it hold performance longer, but it is not a guaranteed frame-rate upgrade, and it will not fix network lag.
Do phone coolers need a power supply?
Most phone coolers need USB-C power while they run, and the charger is often not included. Stronger coolers need stronger chargers, with the 35-watt picks asking for a 40-watt or higher wall charger. The Lumivista S85-GM is the exception here, since its detachable battery supports cordless use for up to three hours.
Will a magnetic cooler work with my case?
A magnetic cooler works with MagSafe-compatible cases and magnetic Android cases. Thick cases can block the cold plate from touching the phone, which hurts cooling. A clip-on cooler such as the Flydigi B7 is the safer choice for a thick or rugged case.
Can I use a phone cooler with a PC setup?
Yes. A phone cooler suits a desk setup where the phone runs a mobile game, a stream, or a companion app beside the PC. Wired coolers suit a desk because a power brick or a PC USB port is always nearby. A cordless cooler is better for play away from the desk.
Final verdict
For maximum cooling, the Black Shark Magnetic Phone Cooler 5 Pro is the strongest pick, with 35 watts of power and grips for non-magnetic phones. The Razer Phone Cooler Chroma is the best match for an RGB desk setup, while the Black Shark FunCooler 5 Magnetic is the balanced mid-range choice. The Flydigi B7 is the strongest clip-on option, and the Lumivista S85-GM is the pick for cordless freedom.



