⏱ 10 min read  ·  ✅ Updated Nov 2026

Resin is the consumable that decides what an MSLA printer can actually make. The printer provides the light and the resolution; the liquid in the vat decides whether a miniature holds crisp detail, whether a bracket survives being dropped, and how much cleanup you face after the print finishes. This guide covers five 1 kg bottles of grey resin, the most useful size and color for general printing. Two are standard resins for detail work, two are ABS-like formulas for tougher functional parts, and one is a water-washable resin that skips the alcohol bath. All five cure at 405 nm, the wavelength every current MSLA printer uses, and all five are verified listings for the exact bottle and color named.

Our top pick: ELEGOO Standard Grey 1000g. Runner-up: Siraya Tech Fast ABS-Like Grey 1kg.

As an Amazon Associate, we earn from qualifying purchases.

How to choose the right 3D printer resin

Start with the resin family, because that choice matters more than the brand. Standard resin is the default: it prints fine detail, holds sharp edges on miniatures and display pieces, and costs less per bottle than specialty formulas. Its weakness is brittleness — thin standard-resin parts snap rather than flex. ABS-like resin trades a little of that crispness for toughness. It is stiffer and less brittle, so it suits functional parts, clips, brackets, and anything that gets handled, dropped, or screwed into place. Water-washable resin is a standard-style formula that rinses clean with water instead of isopropyl alcohol. It simplifies cleanup and removes the alcohol bath from your workflow, but it is still uncured photopolymer resin while it is liquid, and it still demands gloves and ventilation.

Wavelength is the second check. 405 nm is the standard curing wavelength for MSLA printers, and every pick in this guide cures at 405 nm. One pick, the ANYCUBIC Water Washable 2.0, lists a wider 365–405 nm range, which makes it compatible with a broader set of light sources. If your printer uses a 405 nm light source, which nearly all current LCD and DLP machines do, any of these five bottles will cure in it. Exposure times are printer-dependent — they vary with your machine, layer height, and ambient temperature — so treat them as settings to dial in on your own printer rather than as fixed resin specifications.

Shrinkage and viscosity shape print quality in quieter ways. Low-shrinkage resin holds dimensions better, which matters when parts must fit together or match a scale. Lower-viscosity resin flows back into the vat faster between layers and drains off prints more cleanly. Grey is the most practical color for judging detail: it shows layer lines and surface flaws clearly under a desk lamp, and it takes primer and paint evenly. A 1 kg bottle is the standard size for hobby printing — enough for dozens of miniatures or several larger parts without the resin sitting open for months.

Safety comes before any of that. Uncured resin is a skin and respiratory irritant and a sensitizer, which means repeated unprotected contact can develop into an allergy over time. Wear nitrile gloves and eye protection whenever you handle liquid resin, work in a ventilated room, and wash any skin contact with soap and water right away. Keep resin away from children and pets, and never pour resin or resin-contaminated wash water down a drain — cure leftover resin and wash water under UV light until solid, then follow your local hazardous-waste rules for disposal. Water-washable resin still needs gloves. None of the five listings describes its resin as non-toxic or food-safe, and you should not treat any of them that way.

1. ELEGOO Standard Grey 1000g

The ELEGOO Standard is the default bottle for a reason: it is a straightforward grey resin that prints clean detail at a standard wavelength, with low shrinkage and fast curing, and it has been a staple of the hobby for years. The listing has been retitled to the short current name, ELEGOO Standard 3D Printer Resin Grey 1000g, and the bottle itself is a leak-proof design that travels and stores without the cap seeping. It suits miniatures, terrain, display pieces, and prototypes where surface detail matters more than impact resistance.

This is the bottle to buy first if you are setting up a new printer or restocking a general-purpose shelf. It cures at 405 nm for DLP and LCD machines, and its low-shrinkage formula holds dimensions well enough for parts that need to fit together. Standard resin is brittle compared with ABS-like formulas, so reserve it for pieces that will sit on a shelf or a table rather than parts that take knocks.

Specs

  • Bottle: 1000 g, grey
  • Item weight: 1.98 lb
  • Model: US-EL-3D-052
  • Curing wavelength: 405 nm
  • Printer types: DLP, LCD
  • Formula: standard photopolymer, low shrinkage, fast curing
  • Bottle: leak-proof
  • ASIN: B07Z986566

2. Siraya Tech Fast ABS-Like Grey 1kg

Siraya Tech Fast ABS-Like is the pick for parts that need to survive handling. It is stiff and non-brittle where standard resin would crack, which makes it a better choice for brackets, clips, mechanical prototypes, and miniatures that get played with rather than displayed. The listing describes it as 8K capable, so it keeps up with high-resolution printers, and it cures at 405 nm for LCD and DLP machines.

The listing also describes low odor and easy cleaning with an air gun and alcohol spray. Treat the low-odor wording as the listing’s own claim rather than a measured figure — uncured resin of any formula still belongs in a ventilated room with gloves on. Low shrinkage keeps dimensions honest, and the non-brittle character is the real reason to choose this bottle over a standard resin when a part has thin walls or snap-fit features.

Specs

  • Bottle: 1 kg, grey
  • Item weight: 2.2 lb
  • Curing wavelength: 405 nm
  • Printer types: LCD, DLP
  • Resolution: 8K capable
  • Formula: ABS-like photopolymer, stiff, non-brittle, low shrinkage
  • Odor: low odor (per listing)
  • Cleaning: air gun and alcohol spray (per listing)
  • ASIN: B07VBM4Z7Q

3. ANYCUBIC Upgraded Water Washable Resin 2.0 Grey 1000g

The ANYCUBIC Water Washable 2.0 removes the alcohol bath from the workflow. It rinses clean with water, which the listing attributes to hydrophilic groups in the formula, so cleanup needs a tap and a container rather than a bottle of isopropyl alcohol and a separate wash station routine. That matters most if you print often and want to keep consumables simple — but remember that the wash water is still resin-contaminated and must never go down a drain. Cure it under UV light until solid, then dispose of it under your local hazardous-waste rules.

Beyond the wash step, this is a capable general resin. The listing claims precision up to 0.15 mm, elongation of 16.62 percent, and anti-yellowing behavior, all as listing figures, and it lists a wider 365–405 nm curing range than the 405 nm standard. It is rated for 4K, 8K, and 12K capable LCD and DLP printers, so it will not hold back a high-resolution machine. Use the full current title when you search for it — roundups often shorten it to Water Washable Resin 2.0, but the listing title is Upgraded Water Washable Resin 2.0.

Specs

  • Bottle: 1000 g, grey
  • Item weight: 2.2 lb
  • Model: SSXGY-101A
  • Curing wavelength: 365–405 nm
  • Printer types: LCD, DLP
  • Resolution: 4K, 8K, and 12K capable
  • Formula: water-washable photopolymer, low shrinkage
  • Cleaning: rinses with water (hydrophilic groups, per listing)
  • Precision: up to 0.15 mm (per listing)
  • Elongation: 16.62 percent (per listing)
  • Odor: less odor (per listing)
  • ASIN: B09QKQ3CGB

4. SUNLU ABS-Like Grey 1000g

SUNLU’s ABS-like grey is the second tough option in this guide, and it covers the same ground as the Siraya Tech pick with a slightly different emphasis: it is rated across 2K, 4K, 6K, and 8K LCD, DLP, and SLA printers, so it fits older 2K machines as well as current high-resolution ones. Like the Siraya Tech bottle it is non-brittle with low shrinkage, which makes it a sound choice for functional parts, enclosures, and anything that gets handled regularly.

The listing describes low odor and a leak-proof bottle. As with every resin here, treat the low-odor wording as the listing’s claim and keep the gloves and ventilation in place.

Specs

  • Bottle: 1000 g, grey
  • Item weight: 2.2 lb
  • Curing wavelength: 405 nm
  • Printer types: LCD, DLP, SLA
  • Resolution: 2K, 4K, 6K, and 8K
  • Formula: ABS-like photopolymer, non-brittle, low shrinkage
  • Odor: low odor (per listing)
  • Bottle: leak-proof
  • ASIN: B0BYSKZPJR

5. ANYCUBIC Standard Grey 1kg

The ANYCUBIC Standard is the long-running grey resin in this lineup — the listing dates back to 2018 — and it remains a solid default for detail work. It cures at 405 nm for DLP and LCD machines, with low shrinkage and quick curing, and the listing describes rigidity and toughness for a standard formula. It is the bottle to reach for when you want a known quantity for miniatures, prototypes, and display pieces without paying for a specialty formula.

One practical note from the listing: shake the bottle before use. Resin pigments settle in storage, and a settled bottle prints inconsistently until it is mixed. Give it a thorough shake, pour what you need, and keep the cap tight and the bottle out of sunlight between sessions.

Specs

  • Bottle: 1 kg, grey
  • Item weight: 2 lb (32 oz)
  • Curing wavelength: 405 nm
  • Printer types: DLP, LCD
  • Formula: standard photopolymer, low shrinkage, quick curing
  • Character: rigidity and toughness (per listing)
  • Use note: shake before use
  • ASIN: B07G3663HD

Which resin should you buy?

Match the formula to the job and the choice gets simple. For miniatures, terrain, and display pieces where fine detail matters most, either standard resin will do — the ELEGOO Standard and the ANYCUBIC Standard are interchangeable for most detail work, so pick whichever is on your shelf. For functional parts, brackets, clips, and anything that gets dropped or flexed, choose an ABS-like bottle: the Siraya Tech Fast if you want the 8K-capable pick with the tougher reputation, or the SUNLU ABS-Like if you print on a 2K machine or want the widest printer coverage. For the easiest cleanup, the ANYCUBIC Water Washable 2.0 is the only bottle here that rinses with water, and it is the right call if you print often and want to skip the alcohol bath — just remember that the wash water still needs curing before disposal.

Whichever bottle you choose, the handling rules stay the same: gloves, eye protection, ventilation, and no resin down any drain. Resin is a superb material for detailed parts, and it stays that way as long as it is treated with the respect a chemical deserves.

FAQ

What is the difference between standard resin and ABS-like resin?

Standard resin prints the finest detail and holds sharp edges, but it is brittle — thin parts snap under stress. ABS-like resin is stiffer and non-brittle, so it survives drops, flexing, and handling better, at a small cost in crispness. Use standard resin for miniatures and display pieces, and ABS-like resin for functional parts, brackets, and anything that gets used rather than looked at.

Can I wash water-washable resin down the drain?

No. Water-washable resin rinses clean with water, but the rinse water is contaminated with uncured resin and must never go down a drain. Collect the wash water, cure it under UV light until it solidifies, and dispose of the cured waste under your local hazardous-waste rules. Water-washable resin still requires nitrile gloves and a ventilated workspace.

What wavelength does my printer need?

405 nm is the standard curing wavelength for MSLA printers, and all five picks in this guide cure at 405 nm. The ANYCUBIC Water Washable 2.0 lists a wider 365–405 nm range. Exposure times depend on your printer, layer height, and temperature, so dial them in on your own machine rather than treating any single figure as a fixed resin specification.

How should I store an opened bottle of resin?

Keep it in a cool, dark place with the cap tight, away from sunlight and away from children and pets. Pigments settle in storage, so shake the bottle thoroughly before every use. Do not pour unused resin from the vat back into a different bottle, and wipe the bottle threads clean before resealing so the cap does not glue itself shut.

Conclusion

A 1 kg bottle of grey resin covers most of what an MSLA printer is for, and the five bottles here cover the three formulas that matter: standard resin for detail, ABS-like resin for toughness, and water-washable resin for easy cleanup. Start with a standard bottle if you print miniatures, move to ABS-like when parts need to survive real use, and switch to water-washable when the alcohol bath gets old. Keep the gloves on, keep the room ventilated, and never let uncured resin reach a drain.

Explore Our Guides & Free Tools