⏱ 10 min read  ·  ✅ Updated Nov 2026

The case is the foundation of every custom mechanical keyboard. It sets the weight, sound, and look of the finished board, and decides which circuit boards fit inside. Yet a bare case is the hardest part of a build to shop for: most listings are complete keyboards or kits, and the interchangeable bare housings that exist cluster around a single size.

Our top pick: GK61x and GK64x Anodized Aluminum CNC Case. Runner-up: NPKC and YMDK GH60 Anodizing Aluminum CNC Case.

That size is 60 percent. The GH60 footprint is the standard interchangeable layout for bare cases, with screw positions and plate sizes shared across dozens of circuit boards. Larger layouts — 65 percent, 75 percent, tenkeyless, full-size — are mostly sold as complete keyboards or case-and-board kits, not as bare housings. Every pick here is a 60 percent bare case: a housing only, with no circuit board, switches, or keycaps included.

We compared five bare 60 percent cases in aluminum, bamboo, and acrylic, checking fit, materials, and build details so you can pick the shell that matches your board.

As an Amazon Associate, we earn from qualifying purchases.

How to Choose a Keyboard Case

Layout and circuit-board fit. Fit comes first, because a case that does not match your board is useless no matter how good it looks. All five picks follow the GH60 60 percent footprint, which covers the most common compact boards, but there are traps. Older GK61 and GK64 plates do not fit the newer GK61x and GK64x cases without a plate swap, and the Poker 2 with a Type-C connector and the Poker 3 RGB do not fit the classic GH60 case. Check your board model and plate size against each fit list before you order.

Material. Material shapes the sound and feel of the finished keyboard. CNC-machined aluminum is rigid and heavy, so the board stays planted and produces a firm, bright sound, though it can ring on hard keystrokes unless you add foam. Bamboo is warm to the eye and lighter than metal, with a softer, deeper sound and a natural grain that makes every case slightly different. Acrylic sits between the two: lighter than aluminum, good at showing off underglow, and easier to scratch, so it rewards careful handling.

Mounting style. Most 60 percent bare cases use tray mounting, where the circuit board screws onto standoffs on the case floor. It is simple, firm, and easy to assemble, which is why it remains the default for this size. All five cases here use tray mounting or an equivalent screw-down layout, so assembly means seating the board, driving the screws, and fitting the feet.

Feet and typing angle. Bare cases rarely offer adjustable kickstands: the typing angle is fixed by the case design and its feet. Rubber feet grip the desk and dampen vibration, while machined aluminum feet match the case and last longer. For long typing sessions, a gentle fixed slope with secure rubber feet is the comfortable choice.

What is included, and what is not. A bare case is exactly that: a housing, plus screws and feet. You still need a circuit board, plate, switches, stabilizers, keycaps, and a cable to finish the build. Plan for those parts before you buy, and confirm your plate matches the case.

Underglow and lighting. If you want RGB light to show, the shell matters. A milky acrylic case diffuses underglow across the desk, and a hollow-out aluminum design lets light bleed through its edges, while a solid aluminum case hides underglow almost completely for a cleaner look.

1. GK61x and GK64x Anodized Aluminum CNC Case

This CNC-machined aluminum case is built for the current Geek GK61x and GK64x boards, and it is the most direct upgrade if you own one and want to move it out of its stock plastic shell. The anodized aluminum housing adds real weight and rigidity, and it ships with rubber feet and screws so the swap needs no extra hardware.

Fit is specific here. The case accepts new GK61x and GK64x circuit boards plus GH60-size plates, but plates from the older GK61 and GK64 do not fit and must be replaced first. That plate swap is the only complication in a straightforward move: seat the board, drive the screws, fit the feet, and the keyboard is ready.

The result feels far more solid than the plastic version, with a firmer bottom-out and a cleaner look. If your board is a GK61x or GK64x and you want a metal shell without changing anything else, this is the case made for the job.

Specs

    • Layout: 60 percent
    • Material: CNC anodized aluminum
    • Fit: New GK61x and GK64x circuit boards, plus GH60-size plates
    • Note: Older GK61 and GK64 plates do not fit
    • Included: Case, rubber feet, screws
    • Not included: Circuit board, switches, keycaps

    2. NPKC and YMDK GH60 Anodizing Aluminum CNC Case

    The GH60 aluminum case is the classic 60 percent shell, with the widest fit list of any pick here. It accepts GH60, DZ60, YD60, and XD60 circuit boards plus the Poker 1 and Poker 3, covering most compact boards builders actually own. Machined aluminum feet are included, and the case measures 303 by 104 by 14 mm at about 0.3 kg.

    Two details deserve attention. First, the same case is sold under both the NPKC and YMDK names, so listings may show either brand for the identical housing. Second, the Poker 2 with a Type-C connector and the Poker 3 RGB do not fit, so owners of those boards should check the fit list rather than assuming any Poker board drops in.

    A battery slot under the case floor accepts a battery up to 154 by 41 by 4.2 mm, which makes this a practical shell for a wireless build as well as a wired one. Between the broad fit list, the machined feet, and the battery slot, this is the most flexible aluminum case here and the safest default for a first GH60 build.

    Specs

      • Layout: 60 percent
      • Material: CNC anodized aluminum
      • Fit: GH60, DZ60, YD60, XD60, Poker 1, Poker 3 circuit boards
      • Note: Poker 2 Type-C and Poker 3 RGB do not fit
      • Dimensions: 303 x 104 x 14 mm
      • Weight: About 0.3 kg
      • Included: Case, machined aluminum feet
      • Battery slot: Up to 154 x 41 x 4.2 mm

      3. kbdfans Bamboo Wood Case 60 Percent

      If aluminum feels too cold and industrial for your desk, the kbdfans bamboo case is the warm alternative. Each housing carries its own grain pattern, and the natural wood softens both the look and the sound of the finished board. Typing on bamboo produces a deeper, quieter note than the same switches in aluminum, which many builders prefer for shared rooms and late sessions.

      The case fits GH60, Poker, and DZ60 circuit boards and ships as a case only, with no keyboard parts included. Bamboo is lighter than a solid aluminum housing of the same size, so the finished board is easier to move, though it still has enough mass to sit still during fast typing. Wood needs a little more care: keep it away from standing water and wipe it down rather than soaking it.

      For a builder who wants a natural material and a softer sound without giving up the standard 60 percent footprint, bamboo is the most distinctive option here.

      Specs

        • Layout: 60 percent
        • Material: Bamboo wood
        • Fit: GH60, Poker, DZ60 circuit boards
        • Included: Case only
        • Not included: Circuit board, switches, keycaps
        • Sound: Softer and deeper than aluminum

        4. YMDK Acrylic CNC Case, Milk Case Shell

        The YMDK milk case is the pick for builders who want their lighting to show. The shell is a milky translucent acrylic enclosure with aluminum and rubber parts, and the frosted material diffuses underglow RGB into a soft halo instead of hard points of light. The effect is strongest on a dark desk, where the whole case seems to glow from within.

        Brass screws hold the enclosure together and add a small accent against the pale shell. The case follows the 60 percent GH60 footprint, so it accepts the same compact circuit boards as the other picks, and the acrylic build keeps it lighter than the aluminum options. Acrylic scratches more easily than metal, so this is a case for a desk that stays put rather than a bag.

        If underglow is part of your build, no solid case matches what a translucent shell does with light, and the milk case is the only pick here built around that idea.

        Specs

          • Layout: 60 percent
          • Material: Acrylic enclosure with aluminum and rubber parts
          • Finish: Milky translucent shell, diffuses underglow lighting
          • Hardware: Brass screws
          • Fit: GH60 60 percent circuit boards
          • Included: Case shell and hardware

          5. kutethy KY60 Hollow Out Aluminum Case

          The kutethy KY60 is the modern pick of the group, built for the current generation of 60 percent boards including hall-effect models. Its hollow-out aluminum alloy shell trims weight, helps heat escape, and lets RGB light bleed through the edges. The Silver finish keeps the look clean, and the tray-mount layout makes assembly simple.

          Fit covers the boards builders ask about most: Wooting60, Mad60, Win60, GH60, and 60HE all drop in. The case measures 12 by 4.2 by 0.8 inches, with a USB-C port that lines up with modern circuit boards. Extra screws and rubber feet are included, plus a travel case, a useful extra for a board that moves between home and office.

          The hollow-out design is the deciding feature: a lighter feel and a more open look than a solid CNC case while keeping the rigidity of aluminum. For a builder putting together a Wooting60 or Mad60 setup, or anyone who wants a metal case that shows off lighting, this is the pick to start with.

          Specs

            • Layout: 60 percent
            • Material: Hollow-out aluminum alloy
            • Finish: Silver
            • Mounting: Tray mount
            • Fit: Wooting60, Mad60, Win60, GH60, 60HE circuit boards
            • Dimensions: 12 x 4.2 x 0.8 inches
            • Port: USB-C
            • Included: Case, extra screws, rubber feet, travel case

            Comparing the Five Cases

            The five cases split cleanly by material and purpose. The two CNC aluminum shells, the GK61x case and the NPKC and YMDK GH60 case, are the rigid, heavy options for maximum stability and a firm typing feel. The GH60 case has the wider fit list and the battery slot, while the GK61x case is the tailored fit for current Geek boards. The kbdfans bamboo case trades rigidity for warmth, lighter weight, and a softer sound. The YMDK milk case is the lighting specialist, built to diffuse underglow through its frosted shell. The kutethy KY60 pairs a metal frame with hollow-out edges that show off RGB and fit the newest hall-effect boards.

            Fit should drive the final choice: confirm your board model against the fit list, watch the GK61, GK64, and Poker exceptions, then choose by material and lighting.

            FAQ

            Do keyboard cases come with a circuit board or switches?

            No. Every case in this guide is a bare housing, sold as a case only with screws and feet. You supply the circuit board, plate, switches, stabilizers, keycaps, and cable separately. If you want a complete keyboard, look for a full board or a barebones kit instead.

            Will a 60 percent case fit my GK61 or Poker keyboard?

            It depends on the exact model. New GK61x and GK64x boards fit the GK61x case and GH60-size plates, while older GK61 and GK64 plates need a GH60-size replacement first. Poker 1 and Poker 3 boards fit the GH60 case, but the Poker 2 with a Type-C connector and the Poker 3 RGB do not. Match your board model against the case fit list before ordering.

            Is aluminum or wood better for a keyboard case?

            Neither is better in every way. Aluminum is heavier and more rigid, keeping the board planted and producing a firm, bright typing sound. Bamboo is lighter and warmer, with a softer, deeper sound and a natural grain that makes each case unique. Choose aluminum for stability, bamboo for warmth and quieter typing.

            Can I use a 60 percent case with a hot-swap circuit board?

            Yes. Case fit depends on the circuit-board footprint, screw positions, and plate size, not on how the switches mount. A hot-swap board and a soldered board with the same GH60 footprint fit the same case. Just confirm your board follows the standard 60 percent layout and your plate matches the case.

            Conclusion

            A good case turns a collection of parts into a keyboard that feels finished, and 60 percent is where bare housings are easiest to find. Start with fit: match your board and plate to the case, watching for the GK61, GK64, and Poker exceptions. Then choose by material and lighting. Aluminum brings rigidity and weight, bamboo brings warmth and a softer sound, acrylic shows off underglow, and the hollow-out KY60 pairs metal with modern hall-effect boards.

            Explore Our Guides & Free Tools