⏱ 8 min read  ·  ✅ Updated Nov 2026
⭐ Key Takeaways
Quick answer: Our top pick is Sirlyr 24 PCS Cable Comb Kit Black, with CableMod Pro Bridged Comb Kit White as a strong alternative.

A sleeved power supply cable looks sharp only when every wire runs parallel, and that is exactly what a cable comb does. A comb holds each wire in its own slot, so a 24-pin motherboard run or a pair of GPU power cables stops fanning out behind the glass panel and starts looking like one tidy ribbon. The right set matches your cable diameter and covers the connector sizes in your build.

This guide compares four comb sets for the sleeved PSU cables most builders already own. Each one is a combs-only set, with no extension cables or cable kits bundled in, and each covers the common 24-pin, 8-pin, and 6-pin runs in a different way. One set even includes combs for the newer 12VHPWR GPU connector, while another joins several PCI-e cables into a single wide run.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

For most builders, the Sirlyr 24-piece set is the safest pick because it covers 24-pin, 8-pin, and 12VHPWR cables in one box. Builders on a tighter budget should look at the YANBORONSN 48-piece set, which adds a white set beside the black one. CableMod owners running Pro Series PCI-e cables should choose the bridged kit instead.

Sirlyr 24 PCS Cable Comb Kit Black

Sirlyr 24 PCS Cable Comb Kit Black

Sirlyr 24 PCS Cable Comb Kit Black

Check price on Amazon

The Sirlyr set is the only pick here that covers the newer 12VHPWR GPU connector. The box holds 24 combs: four for 12VHPWR cables, four for 24-pin motherboard cables, and sixteen for 8-pin cables. That mix covers a full modern build in one purchase, including a graphics card with a 16-pin power connector, without leaving you short on 8-pin combs.

The combs accept wire from 3 mm to 3.5 mm, which covers the sleeved 18AWG and 16AWG cables most builders use, and the closed round shape grips each wire firmly enough to keep the run parallel. Thicker paracord sleeving around 4 mm will not seat properly, so measure your cables before ordering if you sleeved them yourself with a heavy braid.

The set is black, and the listing shows more than one color option, so confirm the black set is selected before ordering. The combs are simple closed pieces with no bridge or clip, so they work with any brand of sleeved cable in the right diameter range. For a new system with a current graphics card, it needs the fewest compromises.

Specs

Spec Detail
Brand Sirlyr
Model XS-02
Pieces 24 (4 x 12VHPWR, 4 x 24-pin, 16 x 8-pin)
Wire diameter 3 mm to 3.5 mm
Wire gauge 18AWG and 16AWG
Color Black
Date first available March 6, 2024

CableMod Pro Bridged Comb Kit White

CableMod Pro Bridged Comb Kit White

CableMod Pro Bridged Comb Kit White

Check price on Amazon

The CableMod kit takes a different approach from every other pick here. Instead of separate closed combs for each cable, it uses bridged combs that join multiple PCI-e Pro Series cables into one wide, flat run. The result is a single uniform ribbon of GPU power cables rather than separate bundles, which suits showcase builds, where the graphics card cables are the most visible wiring.

The combs are precision-molded ABS, and they snap on without tools, so you can add or remove them while the cables are already routed. White is the only color, which matches white builds and white CableMod Pro Series cables. The bridged shape also keeps cable spacing even across the whole run, which individual combs can struggle to do.

The trade-off is scope. This kit is designed for CableMod Pro Series PCI-e cables, and it does not cover 24-pin motherboard cables or CPU power cables. It is also sized for CableMod Pro Series cable diameters, so it may not grip other brands of sleeving the same way. Buy it when you already run CableMod Pro Series PCI-e cables.

Specs

Spec Detail
Brand CableMod
Model CM-COM-BKIT-PBPW-R
Material Precision-molded ABS
Color White
Design Bridged combs for multiple PCI-e cables
Compatibility CableMod Pro Series PCI-e cables
Installation Snap-on, tool-free

YANBORONSN 48 pcs Cable Comb Kit

The YANBORONSN set is the value pick of the four: one box holds 48 combs, which is two full 24-piece sets. One set is black and the other is white, so the same purchase covers two builds, a black-and-white themed build, or a single build with spares left over for the next upgrade. Few comb sets at this size include two colors.

The count breaks down as eight 24-pin combs, twenty-four 8-pin combs, and sixteen 6-pin combs. That is enough to dress a motherboard run, two CPU runs, and several GPU runs with combs to spare, which matters in larger cases, where a single 24-pin run can take four combs. The combs fit wire from 3 mm to 3.4 mm, which covers sleeved 18AWG and 16AWG cables, and the listing notes that the combs can be trimmed with a small tool to fit the pins.

The combs are molded from PP plastic in a U-shaped design with a U-buckle, which holds the wires from below rather than closing fully around them. That shape makes them easy to press on and remove when you reroute a cable, though it grips a little less firmly than a fully closed comb. For the most combs per purchase and a second color in the same box, this set is hard to beat.

Specs

Spec Detail
Brand YANBORONSN
Model BRU-001
Pieces 48 (8 x 24-pin, 24 x 8-pin, 16 x 6-pin)
Wire diameter 3 mm to 3.4 mm
Wire gauge 18AWG and 16AWG
Material PP plastic
Design U-shaped with U-buckle
Colors Black and white
UPC 752117387979

upHere CM245 Cable Combs 24-Pack Black

upHere CM245 Cable Combs 24-Pack Black

upHere CM245 Cable Combs 24-Pack Black

Check price on Amazon

The upHere CM245 is the straightforward pick: a 24-piece set of black combs that does one job with no extras. The box holds four 24-pin combs, twelve 8-pin combs, and eight 6-pin combs, which is the mix a single standard build needs. The 24-pin combs use a 12 plus 12 layout, the 8-pin combs a 4 plus 4 layout, and the 6-pin combs a 3 plus 3 layout, so each comb matches the pin grouping of its connector.

Fit is narrow by design. The combs accept sleeved cables from 3 mm to 3.4 mm, and that tight bore is what holds thin sleeving firmly in place. The listing also notes that the set works with silver-plated cables and bare wire. The downside is that thicker sleeving will not seat, so this set suits standard sleeved cables rather than heavy paracord builds.

Black is the only color, which keeps the choice simple and matches the majority of cases and sleeved cable sets. There is no white version, so builders planning a white or two-tone theme should look at the YANBORONSN set instead. For a single black-themed build, the CM245 covers every run without waste.

Specs

Spec Detail
Brand upHere
Model CM245-USA
Pieces 24 (4 x 24-pin, 12 x 8-pin, 8 x 6-pin)
Wire diameter 3 mm to 3.4 mm
Color Black
Compatibility Sleeved cables, silver-plated cables, bare wire

How to choose

Start by measuring the outside diameter of your sleeved cables, because that number decides which sets will fit. Most sleeved PSU cables measure between 3 mm and 3.4 mm, and all four sets in this guide cover that range. The Sirlyr set stretches a little further, to 3.5 mm. Thicker paracord sleeving around 4 mm will not fit any of these combs, so builders who sleeved their own cables with heavy braid need larger combs.

Next, count the connectors in your build. A standard system needs combs for one 24-pin motherboard cable, one or two 8-pin CPU cables, and two or three 8-pin GPU cables. A 24-piece set covers that with a few spares, while a 48-piece set covers it twice over. If your graphics card uses a 12VHPWR connector, only the Sirlyr set includes combs for it.

Then check the brand match. The CableMod bridged kit is built for CableMod Pro Series PCI-e cables, and it shines there, but it is the wrong choice for a build that uses another brand of cables. The other three sets are brand-neutral and work with any sleeved cable in the right diameter range. Finally, decide on color: a white build needs the CableMod white kit or the white half of the YANBORONSN box, while a black build can use any of the four.

Who should skip

Cable combs are made for round sleeved wires, so skip them if your build still uses the flat ribbon cables that come with many stock power supplies. A comb cannot grip a flat ribbon, and forcing one on will only bend the wires out of shape. The same applies inside a small form factor case, where the short, stiff cables leave no visible run to dress.

Skip the narrow-fit sets if your sleeving is thicker than 3.5 mm. Heavy paracord sleeving around 4 mm needs larger combs, and squeezing it into a 3.4 mm bore will either refuse to seat or pinch the sleeve. Builders who want cable clips, cable ties, or cable management boxes should look elsewhere, because combs dress cables that are already routed, while clips and boxes hide cables that are not.

Frequently Asked Questions

Do cable combs fit all sleeved PSU cables?

No. Combs fit a specific wire diameter range, and every set in this guide covers 3 mm to 3.4 mm or 3.5 mm. Measure your sleeved cables first, and check connector sizes too, because a set without 12VHPWR combs will not dress a newer GPU power cable.

How many combs does one build need?

A single standard build usually needs about 24 combs. Plan on two to four combs for the 24-pin run, two or three for each 8-pin run, and one or two for each 6-pin run. A 24-piece set covers that with spares, while a 48-piece set covers two builds.

Can I reuse cable combs in a new build?

Yes. Snap-on combs are reusable, and most builders move them from one build to the next. Check each comb for cracks or a loose grip before reusing it, and replace any that no longer hold the wires parallel.

Do I need 12VHPWR combs for a new graphics card?

Only if the card uses a 12VHPWR connector. Cards with that connector need a 16-pin comb, and the Sirlyr set is the only pick here that includes them. Cards that still use 8-pin connectors are covered by the 8-pin combs in any of the four sets.

Final verdict

The Sirlyr set is the best pick for most builders because it is the only one that covers 12VHPWR cables alongside the standard 24-pin and 8-pin runs. The YANBORONSN set is the best value, with 48 combs in black and white for two builds or a two-tone theme. The CableMod bridged kit suits builders already running CableMod Pro Series PCI-e cables who want a single wide GPU run. The upHere CM245 is the simple pick for a single black build.

Explore Our Guides & Free Tools