The feet on the bottom of a gaming mouse do more for aim than most builders expect. Stock feet wear down, pick up grit, and develop uneven friction after months of daily play, which makes small adjustments feel scratchy and flicks feel inconsistent. A fresh set of replacement skates restores a smooth, even glide for a fraction of what a new mouse would cost, and the swap takes only a few minutes with a flat tool and a cleaning wipe.
- Quick Answer
- 1. ESPTIGER ICE V2 for Logitech G Pro X Superlight 2
- 2. Pulsar Superglide Type-C for Logitech G Pro X Superlight 2, White
- 3. Pulsar Superglide Type-S Universal Glass Dots, White
- 4. X-Raypad Jade Air Universal Dots, Green
- 5. Corepad Skatez CTRL for Logitech G Pro X Superlight
- How to choose
- Who should skip
- Frequently Asked Questions
- Final verdict
This guide covers five replacement sets: two shaped sets for the Logitech G Pro X Superlight 2, one control set for the original Superlight, and two universal dot sets that fit almost any mouse. Every pick carries a confirmed Amazon ASIN, and the notes flag exactly where that confirmation came from.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For raw speed on a Superlight 2, the ESPTIGER ICE V2 is the PTFE pick and the Pulsar Superglide Type-C is the glass pick. For any other mouse, the Pulsar Superglide Type-S universal glass dots and the X-Raypad Jade Air dots cover most layouts. The Corepad Skatez CTRL suits players who want a slower, more controlled glide on the original Superlight.
1. ESPTIGER ICE V2 for Logitech G Pro X Superlight 2
The ESPTIGER ICE V2 is the speed pick in this guide. Cut for the Logitech G Pro X Superlight 2, it uses high-purity PTFE with a 2.5D edge arc, which rounds each skate’s rim so it does not dig into a cloth pad during hard flicks. Install is simple: peel the old feet off, clean the residue, let the base dry, then align the new skates.
The glide is fast with very low starting friction, which suits tracking-heavy games. The trade-off is stopping power: the mouse may run long on fast pads. One customer note on the listing says the skates did not fit, so confirm the Superlight 2 fit before ordering. The listing names the Superlight 2 only, so do not assume a first-generation fit from roundup tables. Thickness is 0.8 mm per roundup coverage, not the product information excerpt, and the pack holds one set plus a cleaning wipe, with no spare for a misplaced skate.
Specs
| Spec | Detail |
|---|---|
| Material | High-purity PTFE |
| Edge treatment | 2.5D edge arc |
| Adhesive | 3M adhesive |
| Thickness | 0.8 mm (per roundup coverage) |
| Compatibility | Logitech G Pro X Superlight 2 |
| ASIN | B0CQTTBJLB |
2. Pulsar Superglide Type-C for Logitech G Pro X Superlight 2, White
The Pulsar Superglide Type-C is the glass pick in this guide. Cut for the Logitech G Pro X Superlight 2, it is made from aluminosilicate glass with a micro-textured control surface and rounded edges, so the glide is extremely fast with almost no starting friction. Glass does not wear down the way PTFE does, which makes it a long-term pick. The white colorway is the version listed here.
Glass skates take adjustment: the mouse stops only when the hand stops it, so low-sensitivity players may overshoot until muscle memory adapts. Glass also demands a clean cloth pad: grit under a glass skate can scratch the pad, and glass must never be used on a glass mousepad, since glass on glass damages both surfaces. The black Type-S version for the same mouse is a separate listing with its own model code, so confirm the white Type-C model and ASIN together before ordering.
Specs
| Spec | Detail |
|---|---|
| Material | Aluminosilicate glass |
| Surface | Micro-textured control surface |
| Thickness | 0.8 mm (per roundup coverage) |
| Compatibility | Logitech G Pro X Superlight 2 |
| Model number | LGS2GW2 |
| ASIN | B0CKXQ5R7S |
3. Pulsar Superglide Type-S Universal Glass Dots, White
The Pulsar Superglide Type-S Universal set solves the fit problem that shaped skates cannot. Instead of a pre-cut shape for one mouse, it ships as twelve glass dots in 6 mm and 9 mm sizes that stick to the base of almost any mouse, so one pack covers mice that no brand makes a shaped set for. The dots use the same Superglide glass as the shaped sets, with a polished round edge.
Universal dots need a little planning. The stock feet set the layout: place the dots where the original feet sat, clear of the sensor window and the battery or receiver compartment. Twelve dots cover one mouse with a few spares, not two mice. The 6 mm dots suit small feet and tight corners, the 9 mm dots larger flat areas. The same glass warnings apply as to the shaped glass set: keep the pad clean, and never run glass dots on a glass mousepad. Thickness is not stated in the product information excerpt.
Specs
| Spec | Detail |
|---|---|
| Material | Glass |
| Format | Universal dots, 6 mm + 9 mm |
| Quantity | 12 pieces |
| Compatibility | Universal (fits most mice) |
| Model number | UNIDOTSGW |
| ASIN | B0DLWQ8MJB |
4. X-Raypad Jade Air Universal Dots, Green
The X-Raypad Jade Air set is the speed dot in this guide. It ships as forty universal dots in a 6.5 mm diameter, made from U-PE, the ultra-high-molecular-weight polyethylene family used in high-end dot skates. The dots are DIY: the buyer decides how many to use and where, which suits odd base layouts. Forty dots cover several applications, with spares if one is placed wrong.
Jade Air sits on the speed side of the X-Raypad dot family. Its siblings in the same listing family trade speed for control: the Obsidian Air in purple is hardened PTFE with a frosted surface, and the Obsidian Pro Air in grey is UHMWPE tuned for the most control. This listing merges those variants, so confirm the Jade Air green color and ASIN together before ordering: the wrong variant changes the glide character completely. The dots are made for cloth and glass pads, and X-Raypad guidance warns against coated or plastic pads. Thickness is also not settled: the 1.0 mm figure in the listing description belongs to the Obsidian Pro Air variant.
Specs
| Spec | Detail |
|---|---|
| Material | U-PE (ultra-high-molecular-weight polyethylene) |
| Format | Universal dots, 6.5 mm diameter |
| Quantity | 40 dots per pack |
| Compatibility | Universal (fits most mice) |
| Pad compatibility | Cloth and glass pads |
| ASIN | B0DLG9M6V9 |
5. Corepad Skatez CTRL for Logitech G Pro X Superlight
The Corepad Skatez CTRL is the control pick in this guide. Cut for the original Logitech G Pro X Superlight and made from pure PTFE with a 3M self-adhesive backing, its surface is heat-treated to give a consistently smooth finish with a slightly slower glide than the regular PRO series. That extra control suits tactical shooters, where holding an angle matters more than raw flick speed.
The pack holds two full sets: the second is ready when the first wears down. Corepad’s install note matters: the stock feet have two layers, including the center ring, and both must be removed before the new skates go on. The CTRL sits between the balanced PRO and the faster AIR, so confirm the CTRL name and model code together before ordering. The confirmation here is the weakest in the guide: the ASIN comes from a price-history record, not an explicit amazon.com product information excerpt, and the last recorded scan dates to August 2023, so the stock signal is stale and a live offer must be checked before ordering.
Specs
| Spec | Detail |
|---|---|
| Material | 100 percent PTFE |
| Glide character | Control (heat-treated surface, slower than PRO) |
| Quantity | 2 sets per package |
| Compatibility | Logitech G Pro X Superlight |
| Model number | CSC6020 |
| ASIN | B09XB39ZJQ |
How to choose
Start with the mouse. Shaped skates only fit the model named on the listing, so match the exact mouse and generation before anything else. The Superlight 2 and the original Superlight look nearly identical from above, but their base layouts differ. If no shaped set exists for the mouse, universal dots are the answer.
Then pick the material by glide character. PTFE is the balanced default: fast, forgiving, and consistent on cloth pads. Glass is the fastest option and does not wear down, but it needs a clean cloth pad and never belongs on a glass pad. U-PE dots sit between the two, with the Jade Air tuned for speed and the Obsidian family tuned for control. Most sets run near 0.8 mm thick, and a thicker skate raises the mouse slightly. Finally, check the pack: two-set packs double the usable life, while single-set packs need a careful install.
Who should skip
Skip replacement feet entirely if the stock feet still glide evenly and show no wear, because a fresh set changes the feel of a mouse the hand already knows. Skip glass skates if the pad is glass, coated, or plastic, or if the desk area collects grit, since glass punishes a dirty surface. Skip shaped sets if the mouse model is uncertain, since a wrong-fit set wastes the purchase and universal dots are the safer buy. Skip the control sets if the goal is maximum flick speed, since their whole point is a slower, more planted glide. And skip any set whose listing cannot be confirmed as in stock.
Frequently Asked Questions
Do mouse feet fit any mouse?
No. Shaped skates are cut for one mouse model and generation, so the exact model must match the listing. Universal dots fit almost any mouse because the buyer places them by hand, but they still need to clear the sensor window and any compartment on the base.
How long do replacement mouse feet last?
It depends on the material and the hours played. PTFE skates wear down over months of heavy use, which is why two-set packs exist. Glass skates do not wear down the same way, but they still need a clean pad and careful handling, since a hard knock can chip an edge.
Do I need to remove the old feet before installing new ones?
Yes. Peel the old feet off completely, including the center ring on Logitech mice, then clean off the adhesive residue and let the base dry. Sticking new skates over old ones leaves the base uneven and changes the sensor height.
Are glass mouse feet better than PTFE?
Glass is faster and lasts longer, but it is not better for everyone. PTFE gives more stopping power and forgives a dusty pad, while glass needs a clean cloth pad and asks the hand to control every stop. Players who overshoot flicks on PTFE usually do worse on glass, not better.
Final verdict
For a Superlight 2, the choice is between the ESPTIGER ICE V2 for fast PTFE and the Pulsar Superglide Type-C for glass, both confirmed from explicit amazon.com product information. For any other mouse, the Pulsar Superglide Type-S universal glass dots and the X-Raypad Jade Air dots cover nearly every base layout, with glass for speed and U-PE dots for a more forgiving feel. The Corepad Skatez CTRL is the control option for the original Superlight, though its confirmation is the weakest here and needs a live stock check. Match the fit first, pick the glide character second, and the mouse will feel new again.




