⏱ 13 min read  ·  ✅ Updated Oct 2026

The gtek 240hz gaming monitor review most shoppers need is really a review of the GTEK Q2740P, a 27-inch flat monitor that pairs 2560 × 1440 resolution with a 240Hz refresh rate and a Fast IPS panel. On paper, that is an appealing mix for competitive gaming and everyday desktop use, especially if you want sharper detail than 1080p without stepping up to 4K. The caveat is evidence: GTEK publishes the core specifications, but there is no dependable independent lab review available with repeatable response-time, input-lag, color-accuracy, or brightness measurements. Treat this as a specification-based review, not a claim of detailed research.

GTEK 240Hz gaming monitor review: the verdict

The GTEK Q2740P is worth considering if its current price stays near the lower end of the 27-inch QHD 240Hz market and you prioritize resolution and refresh rate over a long record of independent testing. A 2560 × 1440 Fast IPS panel gives you a useful balance: more room and finer detail than Full HD, plus a refresh ceiling high enough for competitive games when your PC can deliver the frames.

Its practical strengths are the combination of 1440p and 240Hz, a matte screen, a height-adjustable stand, VESA mounting support, and both DisplayPort and HDMI connectivity. GTEK also lists three USB ports on its current product page, although the published specification does not identify their type or layout clearly enough to treat them as a full docking solution.

The uncertainties are as important as the headline numbers. The advertised 1ms figure is MPRT, not a verified gray-to-gray transition result. Maximum brightness is listed as 300 nits, with no independently measured HDR performance available. The live product material also does not provide a full port-by-port refresh-rate table, quantified color coverage, or measured input lag. The Q2740P may still be a capable budget gaming display, but its value relies on a relatively short spec sheet and weaker third-party validation than established monitor lines offer.

Specification GTEK Q2740P
Screen size 27 inches
Resolution and aspect ratio 2560 × 1440, 16:9
Panel Fast IPS, flat
Maximum refresh rate 240Hz (manufacturer-listed)
Response-time claim 1ms MPRT (manufacturer-listed)
Brightness 300 nits (manufacturer-listed)
Screen surface Matte
Ports DisplayPort and HDMI; manufacturer lists three USB ports, port types not specified on the product page
Stand and mounting Height-adjustable stand; VESA compatible, mount pattern not specified in the current product-page text
Speaker information No clearly confirmed built-in speaker specification on the current manufacturer page

What this GTEK 240Hz gaming monitor review can verify

The main evidence comes from GTEK’s current Q2740P product page and its US-facing retail listing at Newegg. Both identify the monitor as a 27-inch 2560 × 1440, 240Hz Fast IPS model, and the manufacturer lists a 300-nit brightness specification, a matte surface, height adjustment, and VESA compatibility. GTEK’s site also displayed a $189 price during this check, while Newegg displayed listings around $199 to $205 depending on seller and listing. Those are observed listings, not guaranteed street prices or a promise of continued stock.

I found no established monitor-testing outlet publishing instrumented results for this exact model. Newegg’s listing showed no customer reviews when checked, and online review pages that offer precise-sounding ratings without a clear test method are not a substitute for measured evidence. For that reason, this review does not assign a performance score or claim a specific response time, contrast ratio, color error, or input-lag result beyond what GTEK states.

There is also a model-name trap. GTEK sells multiple fast monitors, including the curved F2740C and the F2730, while Q2740P is the flat QHD 240Hz model covered here. Some third-party pages mix model names or carry inconsistent manual labels. Check the exact Q2740P name and 2560 × 1440 resolution on the listing before purchasing rather than using “GTEK 240Hz” alone as an identifier.

Display quality: QHD is the right middle ground for 27 inches

The Q2740P’s biggest advantage over a 24- or 27-inch Full HD 240Hz monitor is its 2560 × 1440 native resolution. QHD contains about 78 percent more pixels than 1920 × 1080, giving games, text, and desktop windows additional detail without the rendering load of 3840 × 2160. At 27 inches, that resolution is a sensible balance for a main monitor used for both gaming and general computing.

The Fast IPS panel is another practical choice. IPS technology is typically favored for broad viewing angles and more consistent color presentation away from the center than many budget TN displays. That does not guarantee accurate factory calibration or a wide color gamut, though. GTEK’s current specification page does not publish enough quantified color data to recommend this monitor for color-critical photo work, print design, or professional grading. If color accuracy is central to your work, look for independent measurements and a stated coverage target such as sRGB or DCI-P3.

GTEK specifies 300 nits of brightness. That should be a reasonable target for ordinary indoor gaming and office use, provided the actual unit performs near the rating, but it is not a standout figure for a bright room full of direct sunlight. The page does not provide an independently verified HDR peak-brightness figure or a meaningful certification that would establish convincing HDR performance. Buy it as an SDR gaming display unless further testing proves otherwise, not as an HDR showcase monitor.

The matte screen surface is useful in rooms with lamps or indirect window light because it can reduce mirror-like reflections. It cannot prevent the entire image from looking washed out under direct glare, and surface finish does not replace sensible placement. Set the display so strong light sources are not directly reflected toward your eyes.

Gaming performance: the potential of 240Hz

A 240Hz display can refresh the image about every 4.17 milliseconds, compared with 6.94 milliseconds at 144Hz and 16.67 milliseconds at 60Hz. That shorter refresh interval can make camera motion, tracking, and rapid aiming feel more immediate, particularly in games where the system consistently renders high frame rates. The Q2740P therefore makes the most sense for competitive shooters, racing games, and other fast-moving titles where you can use the added headroom.

A high refresh ceiling does not mean the monitor will produce 240 frames per second. Your CPU, graphics card, game engine, settings, and resolution determine frame rate. QHD is more demanding than Full HD, so a system that produces 240 FPS at 1080p may not do so at 1440p. Before choosing this monitor specifically for esports, check benchmarks for your own GPU and the games you play. It can still be useful below 240 FPS, but you should not pay extra for refresh headroom that your system rarely reaches unless you are planning an upgrade.

The 1ms MPRT claim deserves careful interpretation. MPRT, or moving picture response time, measures a different aspect of motion presentation from gray-to-gray pixel transition time. Manufacturers can use backlight-strobing or other conditions when quoting MPRT, and the figure alone cannot tell you whether dark transitions smear, whether overshoot appears, or how clean motion looks at 240Hz. Without instrumented testing across multiple overdrive settings, the Q2740P cannot honestly be called a proven 1ms performer.

Variable refresh-rate support also needs verification. The product page reviewed for this article does not clearly state an adaptive-sync certification or provide a complete compatibility matrix. Do not assume official NVIDIA G-SYNC Compatible status just because the monitor may work with some NVIDIA cards, and do not assume every HDMI mode supports the maximum refresh. Use DisplayPort for initial PC setup, then confirm the refresh rate and adaptive-sync options in the graphics driver and monitor’s on-screen menu. Check GTEK’s exact manual or support response if you need HDMI 240Hz, console compatibility, or a specific VRR mode.

Ergonomics, ports, and setup

A height-adjustable stand is meaningful at this price tier because it can help position the top of the screen closer to eye level without stacking books under the base. GTEK says the Q2740P also supports VESA mounting, which gives buyers the option of using a compatible monitor arm. However, its current product-page text does not specify the VESA hole spacing, and the available specifications do not fully document the range of tilt, swivel, or pivot adjustments. Confirm those details before ordering a monitor arm or expecting a portrait orientation.

The manufacturer lists both DisplayPort and HDMI and also lists three USB ports, but it does not make the USB connector types or exact port configuration clear on the spec page. That is not enough evidence to call the monitor a USB-C dock or to promise laptop charging. Buyers who want a one-cable laptop setup should look elsewhere unless GTEK confirms USB-C video and power delivery for the exact SKU. The page’s port list should be checked against photographs and the supplied manual before purchase if you need multiple simultaneous inputs or USB peripheral access.

For a desktop gaming PC, connect the monitor to the graphics card rather than the motherboard video output when using a discrete GPU. Choose DisplayPort first, select 2560 × 1440 in Windows, and then set 240Hz in Advanced display settings or the GPU control panel. If the refresh-rate option does not appear, confirm that the cable is connected to the intended port, that the monitor input matches the cable, and that the GPU driver is current. Test the included cable before buying a replacement; do not assume a cable is defective just because Windows starts at 60Hz.

No reliable source reviewed here confirms built-in speakers on the current Q2740P product page. Plan to use headphones, speakers, or an audio interface connected to the PC unless the exact retailer listing explicitly confirms integrated audio and identifies its capabilities. This small detail can matter if you want a minimalist desk or expect to connect a game console without any separate sound device.

Build quality, warranty, and ownership risk

The Q2740P’s thin-bezel design can work well in a dual-monitor setup, and height adjustment is useful for aligning displays. But published specifications cannot establish the rigidity of the stand, how evenly the panel is assembled, whether backlight bleed varies between units, or how well the on-screen display is laid out. Those are physical-unit questions that require proper hands-on evaluation and a return window.

One Reddit post from May 2025 describes partial-screen flicker over HDMI and a lack of sound from what the buyer expected to be integrated speakers. It is a single user’s account, not proof of a widespread defect, and the exact listing/revision relationship is not fully established. It should not be used to claim that the Q2740P routinely flickers. It does reinforce a sensible new-monitor checklist: test every needed input, run a uniform gray and black screen, inspect the image for dead pixels, verify the refresh rate, and confirm audio behavior before the return period ends.

GTEK currently advertises a three-year HzBoost warranty for eligible gaming monitors, including manufacturing defects and hardware failures under normal use. The publicly available warranty page does not clearly identify the Q2740P by model in the eligibility text, so confirm coverage for the exact SKU and keep the receipt and serial number. The page also says a replacement may be refurbished or a current equivalent if the original model is discontinued; it does not promise a brand-new replacement in every case. Newegg’s listing directs buyers to the seller for warranty details, so retain the seller’s written terms too.

After delivery, keep the packaging until the panel has passed inspection. Return conditions for displays can depend on the seller, and a manufacturer’s warranty is not the same thing as a retailer’s return policy. Test the monitor at its maximum refresh rate, not just during a short 60Hz desktop session, and use a familiar fast-moving game or motion test to look for flicker, unusual artifacts, or instability. If a problem appears, reproduce it across a second cable or source where possible and document the result before contacting support.

Who should buy the GTEK Q2740P?

The Q2740P is a plausible fit for a budget-conscious PC gamer who wants QHD sharpness with 240Hz headroom and is comfortable buying a less extensively reviewed brand. It is especially attractive when its verified selling price is materially below better-documented alternatives and the return period is long enough to inspect the unit properly. For mixed use, the 27-inch QHD size is useful for web browsing, study, spreadsheets, and general productivity between games.

It is less convincing for anyone who needs independently verified color accuracy, validated HDR behavior, guaranteed adaptive-sync compatibility, or a clearly documented USB-C workstation setup. It is also not the right upgrade if your PC rarely reaches frame rates above 100–144 FPS at 1440p and you would benefit more from a better panel, stronger contrast, or improved ergonomics. A less expensive 165Hz or 180Hz QHD display could be the better buy if it saves enough money to improve the graphics card or other part of the setup.

Compared with the GTEK F2740C, the Q2740P is the one to choose when you want a flat QHD workspace instead of a curved Full HD screen. Do not infer that the models share the same panel, ports, refresh modes, stand, or warranty just because their product names look similar. Compare the exact model number against the invoice and manufacturer’s current listing.

Alternatives worth comparing before checkout

If the Q2740P is close in price to a model from a better-established monitor brand, compare the alternatives on measured response times, adaptive-sync behavior, warranty terms, stand adjustments, and return policy—not on refresh rate alone. A well-reviewed 180Hz QHD monitor may have cleaner motion tuning than a poorly tested 240Hz model, and it may deliver a better overall experience when a game runs between 100 and 180 FPS.

If maximum competitive speed matters more than resolution, a 24.5-inch Full HD model can reduce GPU load and keep more of the display within a player’s central field of view. If image detail and single-player games matter more, a QHD screen at 165Hz or 180Hz may be the better allocation of money. The Q2740P sits between those priorities: it gives you 1440p and an unusually high refresh ceiling, but only published testing can establish whether its motion handling matches that promise.

Also compare the complete delivered cost, not only the headline price. Factor in the stand or monitor arm you actually need, any USB hub or speakers that are missing, and the seller’s return terms. A low purchase price can lose its advantage if the included stand does not suit your desk or resolving a defect requires an expensive return shipment. Confirm current US price and stock on the day you order; the prices observed during this research are not a long-term forecast.

Frequently asked questions

Does the GTEK Q2740P really support 240Hz at 1440p?

GTEK and Newegg list 2560 × 1440 at up to 240Hz for the Q2740P. The manufacturer does not provide a complete input-by-input refresh table on the current product page. Use DisplayPort first and verify the operating-system setting; contact support before purchase if your plan depends on a specific HDMI mode.

Is the advertised 1ms response time the same as 1ms GtG?

No. GTEK lists 1ms MPRT, which is not interchangeable with a 1ms gray-to-gray pixel-transition specification. Independent testing would be needed to measure transitions, overshoot, and motion clarity across the monitor’s available response-time settings.

Does the Q2740P support G-SYNC or FreeSync?

The current product-page text reviewed here does not clearly document an official certification or a full variable-refresh compatibility list. Verify the exact revision with GTEK rather than assuming certified support from the generic gaming-monitor category. If VRR is essential, choose a monitor with explicit manufacturer support and independent verification.

Does it have built-in speakers or USB-C charging?

Those features are not clearly confirmed on the current Q2740P specification page. GTEK lists three USB ports but does not specify their types there. Assume you will need separate audio hardware and a separate laptop charging solution unless the exact package documentation confirms otherwise.

Is the Q2740P good for a console?

It can accept video over HDMI, but the available official information does not fully establish the maximum console refresh and VRR modes. Console compatibility depends on the console model, game, selected resolution, and input capabilities. Check the exact supported modes before buying it for a 120Hz console setup.

Is it worth buying at the current price?

It can be a compelling specification-to-price proposition when sold around the manufacturer’s displayed price, but its value is conditional on the actual panel quality, motion tuning, support, and return policy. Buyers who value certainty should pay attention to credible measurements and a clear warranty, not just the 240Hz label.

Final verdict

The GTEK Q2740P has the right ingredients for an affordable high-refresh main monitor: a 27-inch QHD Fast IPS panel, 240Hz specification, matte surface, height-adjustable stand, and VESA support. Its main appeal is the combination of resolution and refresh rate rather than a verified standout in color, HDR, or response performance.

The buying recommendation is cautious rather than negative. Consider it when the price is competitive, you can test the unit promptly, and your setup benefits from 1440p at high refresh rates. Pass if you require proven motion performance, detailed color measurements, confirmed variable refresh support, or unambiguous warranty terms. Until independent measurements of this exact model become available, the Q2740P is best treated as an intriguing specification-led option—not a fully validated performance bargain.

Explore Our Guides & Free Tools