Best Gaming Monitor for PS5 Pro: Top 4K 120Hz Models 2026

A key buying rule for this roundup: the PS5 Pro can output up to 4K at 120Hz, so a 4K/144Hz, 160Hz, or 240Hz monitor can accept the console’s supported high-refresh signal, but it will not make PS5 Pro games run at 144, 160, or 240 FPS. The additional refresh-rate headroom is useful mainly when sharing the monitor with a gaming PC. Native 4K, HDMI 2.1 bandwidth, HDMI VRR compatibility, and good HDR matter more than the highest refresh-rate number.

The best gaming monitors for PS5 Pro

ASUS ROG Swift OLED PG27UCDM: best overall

The ASUS ROG Swift OLED PG27UCDM is the strongest all-around choice for PS5 Pro owners who want premium 4K image quality, excellent HDR, and exceptionally fast motion handling. It features a 26.5-inch viewable fourth-generation Tandem QD-OLED panel, a native 3840 × 2160 resolution, and a maximum refresh rate of 240Hz.

Its two HDMI 2.1 ports support the PS5 Pro’s 4K/120Hz output and console VRR. The 240Hz specification is primarily useful for a gaming PC connected to the same display. ASUS also includes DisplayPort 2.1a, USB-C with 90W power delivery, and a three-port USB hub. The advertised response time is 0.03ms GtG.

The QD-OLED panel is particularly impressive for games with dramatic lighting. Individual pixels control their own illumination, producing deep blacks without the blooming that can occur on LCD monitors with local dimming. Its wide color gamut also helps HDR games display vivid colors and bright effects.

RTINGS independently researched the monitor and found excellent console compatibility, near-instantaneous pixel response, low input lag, and impressive HDR image quality. Its main weakness is ambient light: blacks can appear purple when strong light hits the screen. The review also identifies noticeable VRR flicker when frame rates fluctuate.

ASUS listed the monitor at $1,099 on its US storefront at the time of research. This is a premium purchase, especially considering that the PS5 Pro cannot use the full 240Hz refresh rate. The additional capability makes more sense for someone sharing the display with a high-end PC.

Buy if: You want one of the best 27-inch 4K OLED experiences, excellent motion clarity, HDMI 2.1, and premium HDR.

Skip if: Your budget is limited, your gaming room has substantial sunlight, or you will use the monitor exclusively with a PS5 Pro and do not need PC-oriented extras.

Dell Alienware AW2725Q: best alternative 4K QD-OLED

The Dell Alienware AW2725Q offers another excellent route to premium 4K OLED gaming. Its 26.7-inch QD-OLED panel uses a native 3840 × 2160 resolution and a 240Hz maximum refresh rate. The manufacturer advertises a 0.03ms GtG response time.

The AW2725Q is particularly attractive if you prefer a flat 27-inch screen and want a high-end monitor for both console and PC gaming. It supports HDMI 2.1 signals, including 4K/120Hz with VRR from compatible consoles. Dell also includes two HDMI inputs, DisplayPort 1.4, a USB upstream connection, three USB-A downstream ports, and USB-C with 15W power delivery.

For PS5 Pro gaming, the QD-OLED technology produces deep blacks, vivid colors, and sharp motion. RTINGS tested the exact AW2725Q and found excellent console compatibility, low input lag, and near-instantaneous response. Its HDR image quality is impressive, although the review found that HDR brightness tracking is less accurate than on the ASUS PG27UCDM. The Dell also does not get as bright, and its black levels can be affected by ambient light.

Dell displayed a $799.99 offer on one US product page during research, while another listing displayed $899.99. Verify the selected configuration and checkout price rather than treating either figure as a guaranteed price.

One omission worth considering is the lack of an audio jack. If you normally connect speakers directly to your monitor, that may require a different audio connection.

Buy if: You want a premium 4K QD-OLED monitor with 240Hz PC support and excellent PS5 Pro compatibility, but prefer the Alienware design.

Skip if: You need the most accurate HDR presentation, frequently game in a bright room, or want a direct headphone connection.

Sony INZONE M9 II: best PlayStation-focused monitor

The Sony INZONE M9 II is especially interesting because it includes features designed around PlayStation consoles rather than treating the PS5 Pro as just another HDMI device.

This 26.9-inch monitor uses an IPS LCD panel with native 3840 × 2160 resolution, full-array local dimming, and VESA DisplayHDR 600 certification. Its maximum DisplayPort refresh rate is 160Hz, while its HDMI input supports up to 144Hz. Both are more than sufficient for the console’s 120Hz gaming output. Sony specifies a 1ms response time in its Faster Mode.

Its defining feature is Auto HDR Tone Mapping. When paired with a supported PS5, the monitor can automatically apply HDR calibration information to the display. This makes setup more convenient for users who do not want to spend time adjusting HDR settings manually.

RTINGS also tested the exact M9 II and confirmed HDMI 2.1 console compatibility, 4K/120Hz support, VRR, and low input lag. The monitor gets bright enough to work in moderately bright environments, making it a useful alternative to OLED displays with more restricted bright-room performance.

There are compromises. Its IPS panel cannot produce OLED-level native contrast, and the local-dimming system can create blooming around bright objects. RTINGS also found poor black uniformity, making some dark scenes look cloudy. Its motion handling is good at higher refresh rates, although blur becomes more apparent at lower rates.

Sony’s US store displayed a $699.99 price against a $949.99 listed reference price. It also advertises a three-year limited warranty. This makes it worth considering for buyers who want a PlayStation-oriented feature set rather than simply the fastest panel available.

Buy if: You want 4K/120Hz, Auto HDR Tone Mapping, good brightness, and a monitor designed with PlayStation users in mind.

Skip if: Deep OLED blacks are your priority or you are sensitive to local-dimming blooming.

Acer Nitro XV275K P5biipruzx: best Mini LED option for bright rooms

The Acer Nitro XV275K P5biipruzx is a strong alternative for gamers who want high HDR brightness without purchasing an OLED monitor. It has a 27-inch IPS panel with native 3840 × 2160 resolution, a 160Hz native refresh rate, and Mini LED backlighting with 1,152 local-dimming zones.

Its dual-mode feature can switch the monitor from 4K/160Hz to 1080p/320Hz. The lower-resolution mode is mostly useful for PC gaming, as the PS5 Pro cannot use the additional refresh-rate capacity beyond its supported output modes. For console play, the native 4K mode is the more relevant option.

The model has two HDMI 2.1 inputs, DisplayPort 1.4, USB-C with DisplayPort Alt Mode, a USB hub, and KVM functionality. These connections make it useful for users who occasionally connect a laptop or desktop PC alongside their console. Acer lists a 1ms GtG response time.

RTINGS tested the exact P5biipruzx version and found excellent PS5 console compatibility, low input lag, fast response at different refresh rates, and strong HDR brightness. Its Mini LED backlight improves contrast in HDR scenes, helping bright highlights stand out more clearly than they do on basic IPS monitors.

The main weakness is local-dimming quality. RTINGS identified black crush in dark scenes and halos around bright objects. Black crush can make subtle details in shadowed areas harder to see, which is not ideal in dark game environments. The monitor also lacks usable local dimming in SDR, where its native IPS contrast is comparatively weak.

Micro Center displayed the exact US model at $349.99 with limited store inventory in Houston and St. Davids during research. This is a location-specific retail observation, not a guaranteed nationwide price.

Buy if: You play in a bright room, want 4K/120Hz console support, and prefer Mini LED HDR over OLED.

Skip if: You are particularly sensitive to blooming, want accurate dark-scene detail, or expect OLED-level contrast.

LG UltraGear 27GR93U-B: best straightforward 4K IPS gaming monitor

The LG UltraGear 27GR93U-B is a practical option for PS5 Pro owners who prefer a conventional IPS gaming monitor. Its 27-inch panel has native 3840 × 2160 resolution, a maximum refresh rate of 144Hz, and an advertised 1ms GtG response time.

LG includes two HDMI 2.1 inputs, DisplayPort connectivity, USB upstream and downstream connections, and a headphone output. It supports NVIDIA G-SYNC Compatibility and AMD FreeSync Premium. The stand supports height, tilt, and pivot adjustment.

The monitor’s main advantage is straightforward console compatibility. RTINGS tested the 27GR93U-B and found that it supports the PS5’s 4K gaming signals, with low input lag and fast response at 120Hz. Its IPS panel also provides wide viewing angles, which can be helpful when two people are watching the same screen during co-op sessions.

There are two important compromises. First, the native contrast ratio is low, so blacks can look gray in dark rooms. Second, its HDR performance is limited because it lacks effective local dimming and cannot produce especially impressive highlights. Motion is also blurrier at 60Hz than at higher refresh rates, according to RTINGS.

This is not an OLED replacement, but it is a sensible display for someone who wants a sharp 4K image and reliable console gaming without paying for premium panel technology. Its older model generation also means availability and pricing should be checked carefully before buying.

Buy if: You want native 4K, HDMI 2.1, good 120Hz response, wide viewing angles, and a conventional IPS display.

Skip if: You want cinematic HDR, deep blacks, or the highest possible contrast in dark environments.

Dell S2725QS: best basic 4K/120Hz option

The Dell S2725QS is the entry-level recommendation for PS5 Pro owners who care more about receiving a genuine 4K/120Hz signal than premium gaming image quality. It has a 27-inch IPS panel with a native resolution of 3840 × 2160 and a maximum refresh rate of 120Hz.

Unlike more expensive gaming monitors, it is primarily designed as a general-purpose desktop display. Its gaming-friendly features include two HDMI 2.1 inputs, FreeSync Premium, an adjustable stand, and built-in 5W stereo speakers. Dell’s specifications confirm that the HDMI inputs support 4K/120Hz, HDR, and VRR signals.

RTINGS tested the exact S2725QS and confirmed that it supports the PS5 and PS5 Pro’s 4K/120Hz console signal. It also found low input lag, which helps prevent the monitor from adding unnecessary delay to the gaming setup.

The major compromise is motion handling. RTINGS found noticeable blur behind fast-moving objects at different refresh rates. This makes it less attractive for competitive shooters than the higher-end OLED and gaming IPS alternatives. Its HDR picture is also weak because it lacks local dimming, has relatively low native contrast, and cannot make bright highlights stand out effectively.

Dell’s US storefront displayed the S2725QS at $279.99 on one product offer during research, although other product-page entries displayed $299.99. This is a useful lower-cost 4K/120Hz option, but the savings come with genuine image-quality compromises.

Buy if: You want an affordable 4K/120Hz monitor for casual console gaming, desktop work, and general entertainment.

Skip if: You regularly play fast competitive games, care about impactful HDR, or expect OLED-level motion clarity.

How to choose the best gaming monitor for PS5 Pro

Prioritize native 4K resolution

The biggest reason to buy a PS5 Pro rather than a standard PS5 is its improved graphics capability, including support for enhanced image quality in compatible games. A native 3840 × 2160 monitor lets the console output a detailed 4K image without relying on the monitor to upscale a lower-resolution signal.

However, there is an important distinction between console output resolution and internal game rendering. A game can use native rendering, checkerboard rendering, or reconstruction technologies such as PlayStation Spectral Super Resolution (PSSR) before producing a 4K output signal. The monitor receives the output signal; it does not determine the game’s internal rendering resolution.

A 27-inch 4K monitor is particularly sharp at normal desktop viewing distances. A 32-inch model offers a larger image and can feel more immersive when sitting farther away, although it has lower pixel density at the same resolution.

For most desk setups, 27 inches is a sensible starting point. Choose 32 inches when you have sufficient viewing distance and prefer a larger screen over maximum pixel density.

Understand HDMI 2.1 and actual 4K/120Hz support

HDMI 2.1 is one of the most important specifications when buying a monitor for PS5 Pro. It provides the bandwidth necessary for demanding console signals, including 4K at 120Hz with compatible equipment.

Nevertheless, checking only the HDMI version is insufficient. Manufacturers can advertise HDMI 2.1 while individual monitor inputs support different combinations of resolution, refresh rate, and color format.

Look for explicit confirmation of these capabilities:

• 3840 × 2160 at 120Hz through HDMI.

• HDMI VRR compatibility with PlayStation 5.

• HDR support at the desired refresh rate.

• Compatible signal handling without unexpected resolution restrictions.

The Sony INZONE M9 II, Acer Nitro XV275K P5, ASUS PG27UCDM, and Dell AW2725Q have independent console-testing evidence supporting the relevant high-refresh signals.

The MSI and LG monitor families also offer HDMI 2.1 models, but check their individual specifications rather than assuming all monitors with similar product names have identical bandwidth.

Choose a panel that suits your gaming environment

The right panel depends on whether you prefer cinematic image quality, brightness, or all-around versatility.

OLED is the strongest option for pixel response and native contrast. Each pixel can turn itself off, so dark areas appear genuinely black. This makes OLED particularly attractive for games with nighttime environments, dramatic lighting, and bright visual effects.

QD-OLED generally offers particularly vivid colors, while WOLED is another strong option for high-quality gaming. Both have burn-in considerations, although modern panel-care features and warranties can reduce the ownership risk.

IPS monitors are more versatile for everyday use. They provide wide viewing angles and consistent colors, but native contrast is usually much lower than OLED.

Mini LED is an interesting middle ground. Its many local-dimming zones can improve HDR brightness and dark-scene contrast without relying on OLED pixels. However, blooming around bright objects and loss of shadow detail can occur.

For PS5 Pro owners who want a bright room and do not want OLED maintenance considerations, the Acer Nitro XV275K P5 or Sony INZONE M9 II deserves particular attention.

Don’t pay extra for refresh rates the console cannot use

A 240Hz gaming monitor can be excellent for PC gaming, but the PS5 Pro does not send a 240Hz gaming signal. Its relevant high-refresh gaming mode is 120Hz.

That means a 144Hz monitor and a 240Hz monitor can deliver the same maximum console refresh rate when both accept a compatible 4K/120Hz signal.

The extra refresh-rate capacity becomes more useful when connecting a PC. If you intend to use the display for both platforms, buying a 240Hz model can make sense. Otherwise, spending the additional money on better HDR, local dimming, or OLED technology may produce a more noticeable improvement.

Consider the games you actually play. Competitive shooters benefit from responsive motion and low input lag, while visually demanding single-player titles can make better use of strong contrast and HDR.

Check VRR compatibility rather than just FreeSync branding

Variable Refresh Rate synchronizes the monitor’s refresh cycle with the console’s changing output frame rate. This reduces screen tearing and can make uneven frame delivery look smoother.

Sony supports VRR on compatible PS5 games using HDMI 2.1 VRR-compatible displays. However, a monitor advertising AMD FreeSync does not automatically guarantee that its HDMI input supports the VRR implementation required by the PlayStation.

The best approach is to check an independent PS5 compatibility test or explicit manufacturer documentation. The monitor should support HDMI VRR, not merely Adaptive-Sync through DisplayPort for a PC.

This also matters when buying an older gaming monitor. A model that works perfectly with a PC graphics card may have incomplete compatibility with a PS5 Pro. Confirm the tested resolution and refresh-rate combinations before purchasing.

Don’t overlook HDR performance

HDR can make compatible games look more visually dynamic, but the marketing certification alone does not determine image quality.

Consider three important characteristics:

• Peak brightness: Determines how strongly bright highlights can stand out.

• Native contrast: Determines how effectively the display separates dark and bright areas.

• Local dimming: Controls how independently different screen areas can become brighter or darker.

OLED has an advantage in native contrast because individual pixels can switch off completely. Mini LED can produce bright highlights and improve LCD contrast through local dimming, but blooming may remain. Basic IPS displays usually have weaker HDR performance.

The Sony INZONE M9 II and Acer XV275K P5 offer full-array or Mini LED local dimming, respectively. The ASUS and Dell QD-OLED monitors provide per-pixel illumination instead.

For cinematic games, these differences can be more noticeable than moving from 144Hz to 240Hz when playing on a console limited to 120Hz.

Set up your PS5 Pro correctly

Even an excellent monitor can deliver a disappointing picture when the console is using the wrong output settings.

After connecting the PS5 Pro with the supplied HDMI cable or a certified Ultra High Speed HDMI cable, open Settings, then Screen and Video, followed by Video Output.

Start with these options:

Then check the Current Video Output Signal information to verify the detected resolution, refresh rate, HDR capability, and VRR support.

Sony’s official resolution guide also provides a 1440p output test for compatible displays. This can be useful when troubleshooting a monitor that supports several resolutions but does not automatically select the expected signal.

One final point: enabling 120Hz output does not force every game to run at 120 FPS. The game must have a compatible performance mode, and its actual frame rate depends on its rendering configuration.

Frequently asked questions

Does the PS5 Pro support 4K at 120Hz?

Yes. Compatible monitors can receive 4K/120Hz signals from the PS5 Pro through HDMI 2.1. However, the game itself must support a compatible high-refresh mode to take advantage of 120Hz. The console also supports 8K output with compatible games and displays, but 4K remains the more practical target for mainstream gaming monitors.

Is a 144Hz monitor enough for PS5 Pro?

Yes. A 144Hz monitor that supports 4K/120Hz through HDMI 2.1 is sufficient for the console’s high-refresh gaming mode. A 240Hz monitor does not make PS5 Pro games run at 240 FPS. Its additional refresh capacity is useful mainly for PC gaming.

Can I use a 1440p monitor with PS5 Pro?

Yes. The PS5 supports 1440p output, including compatible 120Hz and VRR combinations. Sony provides a 1440p output test in the console’s video settings. However, 1440p does not provide the same native pixel detail as a 4K monitor, so 4K is generally preferable when your budget allows it.

Is OLED better than Mini LED for PS5 Pro?

OLED generally provides better native contrast, deeper blacks, and faster pixel transitions. Mini LED can deliver higher sustained brightness and impressive HDR highlights without the same OLED burn-in considerations. Choose OLED for cinematic image quality and motion clarity, or Mini LED for brighter environments and long sessions with static interface elements.

Does HDMI 2.1 guarantee 4K/120Hz VRR compatibility?

No. Check the monitor’s documented HDMI bandwidth, supported resolution and refresh combinations, and HDMI VRR compatibility. Independent PS5 testing is particularly useful because FreeSync support through DisplayPort does not automatically guarantee PlayStation VRR compatibility.

Final verdict

The ASUS ROG Swift OLED PG27UCDM is our best overall choice for PS5 Pro thanks to its 4K QD-OLED panel, excellent HDR presentation, and HDMI 2.1 compatibility. The Dell Alienware AW2725Q provides another premium OLED option, while the Sony INZONE M9 II offers useful PlayStation-specific features.

For bright-room gaming, the Acer Nitro XV275K P5 is a strong Mini LED alternative. The LG UltraGear 27GR93U-B offers straightforward 4K IPS gaming, while the Dell S2725QS provides a more affordable way to enjoy 4K/120Hz.

Ultimately, prioritize verified 4K/120Hz support, HDMI VRR, and good image quality. A well-balanced 4K monitor will make better use of your PS5 Pro than an expensive display whose headline refresh rate the console cannot reach.